Rarely does anybody in the dacha build a capital shower made from brick or cinder block. Normally its usage is limited to three summer months and after that during the planting of their vegetable garden, in addition to harvesting. For such a brief period it is enough to construct a light cabin out of any sheet material. Not a bad solution is really a shower to get dacha from polycarbonate with a changing room, which isn’t difficult to design and make yourself. Why it is Much Better to choose polycarbonate for liner the shower

Polycarbonate is only one substance for cladding a dacha shower. With this case with achievement will fit the profiled sheeting or batten. Just today we decided to stop just with this gorgeous and durable stuff.

Let us consider the advantage of utilizing polycarbonate for cladding the shower along with other similar substances:

• In the event the advantages of polycarbonate have persuaded you, let’s proceed to another stage of building a shower for dacha.
• A Couple of important tips regarding the development of the design of a Nation shower using a changing room

Even such a simple structure, as a shower from polycarbonate for dacha requires the creation of this project. It is not required to build complex drawings, and also a simple scheme could be retrieved out. Here you must instantly decide for yourself exactly what you want to construct a shower. Very quickly you may create a lightweight stall and only put it to the ground. More complicated in the manufacture of shower on the foundation with water heating, however, such a design will survive longer. In addition, at a dacha shower you will be able to bathe in sunlight.

So, we begin to independently create a project:

• Structure of a dacha shower starts with discovering its location. It’s important to remember that the tank should be continuously filled with water. Doing this in Saved from afar is embarrassing and difficult. It is better to put the shower stall close to the water intake.
• If the dacha shower will bathe a great deal of individuals, it needs to be placed as close as possible to the cesspool or septic tank. Close setup dacha bath near the cesspool will conserve laying sewer pipes, however it’s desirable not to deliver the stall closer to the accumulator of impurities nearer than 3 m. On warm days, awful smells from the sewage system will permeate the shower, making an unpleasant feeling whilst bathing.
• The water from the tank during a summer shower is warmed from the sun. The stall must be placed in the sunniest area, where there’s not any shade from trees and tall constructions.
• Inside the shower booth and shifting room from polycarbonate must provide lighting, so you may bathe during the night. Only it is crucial to consider that the lights must have a high degree of protection from water. It’s optimal to place shower cottages https://shtorymax.ru/ on the rear of the house. Here are nearest to the sewer, water supply and not far to pull the electrical cable for light.
• Determined by the area of the area of the summer shower, begin to create a scheme of the cottage itself from polycarbonate. Originally it had been decided that the backyard shower will probably be using the changing room. In cases like this, the width of this design will turn out 1,6 m, and the span of 1,6 m. When the owners are overweight individuals, then the diameter of the shower cubicle with a locker area is better to grow 1.2 m.
• within the shower booth provide separation. Separate the dressing area threshold, in addition to tarpaulin curtain. They won’t allow the water to wet clothes and shoes.
• If desirable, the dressing room could be organized from the anteroom. Then, near the shower enclosure separately install extra racks, to which fasten sheets of polycarbonate. The dimensions of this pre-bath is dependent upon the preferences of the operator. Sometimes cottagers build larger pre-baths at which, as well as the dressing room, equip a recreation room. Inside there are seats and a table.
• The whole height of this shower cabin from ground to roof is at least 2.2 m. along with the tank it can reach 2.5 m, and much higher. The height in the shower stall will probably be reduced. Section of this distance below will take a wooden tray, and the shirt will probably hang on a watering can with a faucet not less than 15 cm.

Given all these nuances, on a bit of paper sketches the scheme of the shower using a polycarbonate dressing area, and then proceed to its construction.