The outdoor pool is a superb spot to relax. But with the onset of cold weather, the bathing season finishes. Another drawback of an outside swimming pool is that the rapid clogging with dust, dirt, leaves and other debris. If you construct a pool at a greenhouse in your dacha, the skillet is going to be protected from the harmful effects of the natural environment, and also the bathing season may be extended until the start of frost.

Kinds of greenhouses for a swimming pool

Traditionally organize on a backyard plot pool at a freshwater greenhouse, however, the definition of the kind of construction isn’t confined to the choice of masking substance. From the large quantity of evaporation inside the building is constantly maintained high levels of humidity. Not every substance will be acceptable for the frame of the greenhouse. Wood will rust fast, and black metal is going to be destroyed by corrosion.

The next important choice is the contour. Besides aesthetics, the rainwater for the pool has to have the ability to withstand wind loads and also a massive quantity of precipitation.

A lovely and durable pool at the greenhouse at the cottage will Find the following forms:

• Arch. Semicircular roof layout is not hard to make, as polycarbonate is easy to bend. The arch is resistant to strong gusts of wind. Greenhouses of the form are built over round fonts. https://moyakovka.ru/ The plan isn’t simple to make and spends a great deal of stuff.
• A Couple of slopes. The simplest version of a greenhouse for a ribbon with flat walls is simple to erect. However, the polycarbonate construction is weakly stable, afraid of powerful winds and heavy precipitation. A version with one slope is not acceptable for snowy regions. Usually such greenhouses for swimming pools consist of a horizontal wall, passing into a big semicircle. The construction of polycarbonate is hard to create and requires proper positioning relative to the frequent wind direction.

Choosing the form of a polycarbonate shelter is dependent upon the size of the pool, in addition to how many men and women are depended on the resting place.

• Low. The polycarbonate construction is made simply to protect the water out of clogging, behaving as a cover. Over a little pool more often put hinged tops, and massive fonts are equipped with a sliding system.
• High. Looking at photos of the pool at a polycarbonate greenhouse, you can confidently call the arrangement a real place of rest.

Covered with polycarbonate high greenhouses outfitted with doors that are wide. Do doorways make slipping, with the top elevator or hinged.Advantages of indoor pools

• Polycarbonate and metal profile for the framework are considered an environmentally friendly substance. No compound odors will collect inside the greenhouse from heating the construction under sunlight.
• Polycarbonate cover to the pool is lightweight and durable. If necessary it can be transferred to some other place.
• Inside the greenhouse a greenhouse effect is created. It lowers the intensity of water flow from the pool, lessens the threat of reproduction of harmful microflora. The pool under the polycarbonate dome is protected from debris flushing.
• Lightweight materials are suitable for self sustaining erection of the shelter.
• Polycarbonate pavilion has great light permeability. The material is inexpensive and can last up to 10 years.
• The pool below the shelter will remain clean. No rust will crumble from the stainless profile, and dirty polycarbonate can be easily removed with a rag.

Of the downsides, there is one point. Polycarbonate is fearful of strong mechanical consequences. To ensure that the shelter isn’t damaged by falling branches, the swimming pool is not placed under trees.

Important: To pavilion for the pool for a long time to serve, to pay utilization polycarbonate sheets of thickness less than 8 mm.

Selecting the type of fonts and setup methods

If we briefly consider how to make a pool at a greenhouse from polycarbonate, the job starts with the choice of size. The fonts must be sufficient for all members of the family to see at precisely the same moment. According to the sort of installation of these bowls have been buried, partly embedded or set up on the surface. The latter kind may have a frame swimming at a greenhouse of polycarbonate or a tiny inflatable bowl. The most reliable is considered a fully buried font. In the dacha you can make a bowl below a dome of polycarbonate of two types:

A reinforced concrete font is poured directly inside the pit. At the base of the pit, a pillow of sand with crushed rock is pumped along with a reinforcing mesh is laid. First, the base of the bowl is poured from the mortar. After the concrete hardens, place the formwork for the pouring of the walls. The finished bowl is covered with primer on the exterior and tiled, painted or otherwise finished indoors.