Finishing putty can itself be the ultimate decorative end.

Its direct purpose is:

“Knauf-Multifinish paste” ready-made polymer filler 20kg

KNAUF-Multi-finish paste is a ready-made filler mix based on polymer dispersion with mineral limestone additives and additives which regulate the properties of the mix.

It’s used inside for:

• Puttying the joints involving KNAUF-sheets with a bulbous edge (UC) and a straight cut border, together with reinforcing tape;
• Finishing puttying the joints and surface of KNAUF-sheets, inserted with the mix KNAUF-Fugenfuller or KNAUF-Uniflot, in the preparation of this surface for high quality painting;

KNAUF-Multi-finish paste should not be used for sealing joints between hip noise absorbing gypsum boards.

Properties

• Doesn’t require mixing and aging;
• Has an elastic consistency;
• fills the joints nicely;
• dries fast;
• can be easily coated;
• includes a fantastic adhesion to the substrate;
• includes a high level of whiteness following drying.

Material consumption

Consumption of this filler mix is:

• After sealing the joints of KNAUF-sheets using a thin edge of the AC ~ 0.30-0.35 kg/m2
• at complete puttying of this face with 1 Millimeter layer depth ~ 1.7 kg/m2

Procedure of functions

The temperature of the base and the room air must be at least 10°C.

KNAUF-boards must be firmly constructed on the load-bearing frame, https://gidpostroy.ru/ be sterile, clean and dust-free. Puttying the joints of KNAUF-boards ought to be reached in the operational temperatures and humidity conditions, after all work related to its modifications, which excludes linear deformations of all gypsum board sheets.

Plaster and concrete bases must be even, dry, cleaned of dust, dirt and delamination. Large irregularities or damages have to be levelled with KNAUF-Fugenfüller compound and dried.